Difference between revisions of "Honda CRF230F"
(Created page with "=Jetting= ==Stock jets== Main: 102 Slow: 42 Stock jetting is lean especially on the slow jet. Can move up to a 45. A 45 slow and 120 main is the standard if the air snorkel...") |
|||
(5 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
+ | [[File:Crf230f_wiring_diagram.jpg|thumb|Corrected wiring diagram]] | ||
=Jetting= | =Jetting= | ||
==Stock jets== | ==Stock jets== | ||
Line 5: | Line 6: | ||
Slow: 42 | Slow: 42 | ||
− | Stock jetting is lean especially on the slow jet. Can move up to a 45. A 45 slow and 120 main is the standard if the air snorkel is removed. | + | Stock jetting is lean especially on the slow jet. Can move up to a 45. A 45 slow and 120 main is the standard if the air snorkel is removed. |
+ | |||
+ | ==Modifications ("Uncorking")== | ||
+ | |||
+ | https://docs.google.com/document/d/1mEsw891e5HUdLIrq4yYQzm2QCsRgK-ihDkrL_fu7_iA/pub#h.liicsytlw4nn | ||
+ | |||
+ | ===Recommended Jets=== | ||
+ | |||
+ | '05 needle: 16012-KPS-901 | ||
+ | |||
+ | 120 main: 99113-GHB-1200 | ||
+ | |||
+ | 118 main: 99113-GHB-1180 | ||
+ | |||
+ | 45 slow: 99103-MT2-0450 | ||
+ | |||
+ | |||
+ | |||
+ | ==Seats== | ||
+ | https://seat-concepts.myshopify.com/collections/2014/products/honda-2003-16-crf150f-230f-230x?variant=20638883078 | ||
=Maintenance= | =Maintenance= | ||
Lube swing arm and linkage bearings as well as fork head bearings. | Lube swing arm and linkage bearings as well as fork head bearings. | ||
− | oil: 10w40 every 1000km / 30hours. a semisynthetic motorcycle oil is cheap and safe | + | oil: 10w40 every 1000km / 30hours. a semisynthetic motorcycle oil is cheap and safe. 1.1qt capacity. Rotella T6 synthetic oil for diesels works great. |
air filter: clean and lube when dirty. check it at least every 5-10 hours (after any ride if you ride in mud and sand). | air filter: clean and lube when dirty. check it at least every 5-10 hours (after any ride if you ride in mud and sand). | ||
Line 28: | Line 48: | ||
fork bleeding: every month | fork bleeding: every month | ||
− | |||
− | |||
=Tires= | =Tires= | ||
Line 40: | Line 58: | ||
Pirelli MT16 for front and rear was also recommended. | Pirelli MT16 for front and rear was also recommended. | ||
+ | |||
+ | https://thumpertalk.com/forums/topic/1085533-tire-recommendation/ |
Revision as of 00:52, 21 October 2018
Jetting
Stock jets
Main: 102
Slow: 42
Stock jetting is lean especially on the slow jet. Can move up to a 45. A 45 slow and 120 main is the standard if the air snorkel is removed.
Modifications ("Uncorking")
https://docs.google.com/document/d/1mEsw891e5HUdLIrq4yYQzm2QCsRgK-ihDkrL_fu7_iA/pub#h.liicsytlw4nn
Recommended Jets
'05 needle: 16012-KPS-901
120 main: 99113-GHB-1200
118 main: 99113-GHB-1180
45 slow: 99103-MT2-0450
Seats
Maintenance
Lube swing arm and linkage bearings as well as fork head bearings.
oil: 10w40 every 1000km / 30hours. a semisynthetic motorcycle oil is cheap and safe. 1.1qt capacity. Rotella T6 synthetic oil for diesels works great.
air filter: clean and lube when dirty. check it at least every 5-10 hours (after any ride if you ride in mud and sand).
chain: clean and lube after any ride. Wd40 is not a good lubricant. prefer a specific lube. a spray or, better and cheaper , an high viscosity gear oil.
slack should be 1 inch with the bike on the kickstand (push down and measure from swingarm, push up and measure from swingarm. difference should be 1 inch)
valve clearance: every 2000km / 60hours
brake oil: once a year
plug: once a year
tire pressure: every 15 days
fork bleeding: every month
Tires
Recommended for basic trail riding:
Front: Bridgestone ED11
Rear: IRC VE-33 rear.
Pirelli MT16 for front and rear was also recommended.
https://thumpertalk.com/forums/topic/1085533-tire-recommendation/